From: £1.99
Osmo Polyx®-Oil Effect Raw is a transparent, matt wood finish that offers a unique combination of natural oils and waxes in a single product. It provides several advantages and benefits for wood surfaces.
The oil offers stain resistance, making it resistant to various substances that can potentially stain the wood. It also has water-repellent properties, protecting the wood from water damage. Additionally, it is abrasion-resistant, ensuring that the surface remains durable even with regular use.
One of the notable features of Osmo Polyx®-Oil Effect Raw is its ability to create a pleasant tactile experience, as the finished surface feels smooth and pleasant to the touch.
Compared to conventional finishes, this oil utilizes plant-based ingredients, resulting in a more even color and a harmonious appearance on the wood surface. This can enhance the overall aesthetic of the wood and create a more visually appealing finish.
The application process is simple and convenient, as it does not require the use of a primer or intermediate sanding. This saves both time and money during the finishing process.
SURFACE PREPARATION: Before applying Osmo Polyx®-Oil Effect Raw, ensure that the wood surface is clean, dry, and free from frost. The moisture content of the wood should not exceed 18%. It is important to remove any old microporous stains, paints, and lacquers completely. During sanding works, it is recommended to wear a dust mask for protection. Fill any small cracks, larger joints, or holes in the wood using Osmo Wood Filler. Carefully sand the wood surfaces starting with coarse sandpaper, and progress to finer grades depending on whether it is for flooring (P120-150) or furniture (P180-240). Prior to oiling the surface, remove any sanding dust using a soft brush or a vacuum cleaner. Note that applying Polyx®-Oil Effect Raw over highly textured or coarse surfaces may result in a more pronounced white appearance.
The finished surface can be influenced by various factors, including the condition of the wood. Hence, it is recommended to perform a trial application, especially on unfamiliar surfaces.
METHOD OF APPLICATION: Using an Osmo Flat Brush, Floor Brush, or Osmo Microfibre Roller, apply Osmo Polyx®-Oil Effect Raw thinly and evenly along the wood grain, ensuring thorough coverage. It is important to spread the oil well to avoid excess application, as excessive Polyx®-Oil Effect Raw (3044) may result in a white chalky surface. If any visible white pigments are present, remove them before allowing the surface to dry. Provide good ventilation and allow the oil to dry for approximately 24 hours.
After drying, apply a second coat of Polyx®-Oil Effect Raw thinly and evenly. When renovating or recoating an already oiled surface, a single coat applied to a clean and dry surface is usually sufficient.
