Fiddes Supreme Wax Polish

From: £12.74

Please enter a number
*Condition of surface and application can vary coverage

Fiddes Supreme Wax Polish is specifically formulated to provide excellent results on both bare and sealed wood surfaces. It is a high-quality wax polish that contains a unique blend of environmentally friendly waxes, which enhance the natural beauty of the wood.

One of the advantages of Fiddes Supreme Wax Polish is its quick-drying formula. This allows for efficient application and minimizes the waiting time before buffing and enjoying the desired sheen level.

Additionally, Fiddes Supreme Wax Polish is low aromatic, which means it has a reduced odor compared to many traditional toluene-based wax polishes. This makes it more pleasant to use, especially in indoor environments.

The Supreme Wax range is available in seven consistent color shades, along with a Clear/Light option. This provides you with a variety of choices to match your wood’s color and achieve the desired look.

When applied and buffed to the desired sheen level, Fiddes Supreme Wax Polish creates a protective layer that revives the wood’s original patina and enhances its overall appearance. The wax polish provides a depth of finish that adds beauty and protection to the wood surface.

Overall, Fiddes Supreme Wax Polish is easy to apply, offers excellent results, and is a reliable choice for enhancing the natural beauty of your wood furniture, floors, or other wooden surfaces.


To apply Fiddes Supreme Wax Polish, you have the option to use a cloth, brush, or sponge. Here are the recommended instructions for application:

  1. Preparation: Start by sanding the wooden substrate in stages using medium sandpaper (120 grit) and gradually progressing to a medium/fine grade (180-220 grit). Always sand in the direction of the wood grain to ensure a smooth surface and remove any blemishes or glue residue. Thoroughly clean the surface to remove all traces of sanding dust. It is advisable to test the chosen Fiddes Supreme Wax shade on a similar substrate to verify the color. For open-grained woods, applying a coat of Fiddes Shellac Sealer before waxing is recommended.
  2. Application: Take a clean cotton cloth, sponge, or brush and apply the Supreme Wax in the direction of the wood grain. Ensure an even and uniform application by wiping evenly over the entire surface area. Apply a small degree of pressure when applying by hand to blend the wax evenly. Take care to remove any excess Supreme Wax immediately with a separate clean absorbent cloth, following the grain pattern.
  3. Drying Time: Leave the applied Supreme Wax to dry for approximately 3 minutes at room temperature.
  4. Buffing: After the drying period, buff the waxed surface to achieve the desired finish and sheen level. Use a soft cloth to gently buff the surface, bringing out the shine and enhancing the appearance.
  5. Additional Coats: If desired, you can apply further coats of Fiddes Supreme Wax to deepen the existing color and shade, as well as enhance the sheen level. Repeat the application and drying process for each additional coat.

It’s important to note that the coverage of the wax will depend on the substrate and the method of application. On average, you can expect a coverage of 16 square meters per liter of Fiddes Supreme Wax.

When working with Fiddes Supreme Wax, it is recommended to use White Spirit as a thinner if needed. This can help adjust the consistency or aid in the application process.

Overall, Fiddes Supreme Wax Polish is a versatile product that offers a quick-drying time, easy application, and the ability to deepen color, enhance sheen, and protect your wooden surfaces.

Suggested Products

Coming Soon

You may also like…

    Your Cart
    Your cart is emptyReturn to Shop