Fiddes Premier HPX Floor Lacquer – 4.5L

Fiddes Premier HPX Floor Lacquer is a high performance, water based, 2 component cross linking 100% Polyurethane floor finish.
For professional use only when using HPX Hardener. Ideal for the surface treatment of wooden floors in commercial & domestic areas, that are subject to heavy wear.
Fiddes Premier HPX Floor Lacquer has a high resistance to abrasion, and also offers excellent resistance to liquids in areas of medium to heavy traffic.

Coverage- 8-10 sqm per litre at 120-100g/m2 per coat

Coats- Two coats on hard wood substrate, 3 coats on open or more porous timber.

Recommended For Use On- Wooden flooring

Preparation- Ensure all surfaces are clean, dry, and free from any
previous finish. Fill any cracks/knots with Fiddes Floor Filler Gel where required.
Sand the substrate with a fine 120/150 grade sanding paper or 120/150 grit
sanding disk, removing all traces of dust.

Application- Add 500ml HPX Hardener to 4.5lt and stir vigorously. This will result in 5lt of mixed product. For professional use only.
Ensure all areas to be coated are extremely well ventilated during and after application. Always test on a small area prior to initial application. Maximum 2 coats recommended. Apply at room temperature. Fiddes HPX Floor Lacquer is formulated for application directly, and does not require thinning.

First Coat- Stir contents thoroughly before and during use, and apply in a warm, well ventilated room. Apply THINLY using Fiddes Floor Oil Brush or a good quality bristle or synthetic brush, and lay EVENLY, following the direction of the grain. Leave to dry 2-3 hours in warm, dry well ventilated conditions.

Second Coat- Apply as first coat, THINLY, allowing good ventilation. Leave to dry 2-3 hours in warm, dry well ventilated conditions. Clean applicator with water

Cleaning & Maintenance- For regular light cleaning, a damp cloth should be applied and resulting clean area
left to dry. Periodically, an application of Fiddes Floor Surface Cleaner is recommended.

Notes- Always test intercoat adhesion prior to major application.
Do not apply in high temperatures (25c +)
Longer drying periods may occur in cold, damp or humid conditions.
Allow 24 Hours before use. Full curing in 7 days.
Store in frost free area.
Once mixed, HPX Lacquer cannot be rehardened.

Packaging- 4.5lt + 500ml Hardener

Finishes- Gloss, Satin, Matt

No Data Sheet available for this product

Suggested Products

Coming Soon

You may also like…

    Your Cart
    Your cart is emptyReturn to Shop