Fiddes Exterior Wood Protector is a solvent based water repelling sealer, that penetrates deeply into both smooth and planed rough sawn exterior timber.
5l.
Please enter a number
*Condition of surface and application can vary coverage
Formulated to both maintain and protect, preventing surface growth of algae whilst offering high resistance to water penetration with excellent beading.
Available in a range of Clear and 2 natural colour shades that contain UV filters to resist colour fade.
Ideal for Sheds, Fences and timber joinery, however not suitable for use on decking or garden furniture or in areas subjected to high wear or footfall.
Coverage
A single application will approximately cover 6 square meters per litre, depending on density of substrate.
Preparation
Ensure all surfaces are clean, dry, and free from any previous finish.
Remove any fungal growth, dirt or moss on old wood prior to application
Sand the substrate with a medium 120 grade sanding paper, removing all traces of dust.
Application
Apply in dry conditions.
Always test on a small area prior to initial application to check colour shade. Apply with brush or solvent resistant, low pressure garden sprayer, ideally in still conditions if spraying.
First Coat
Stir contents thoroughly before and during use. Apply consistently using a good quality bristle or synthetic brush and lay evenly, following the direction of the grain. Leave to dry 12 hours or preferably overnight.
Second Coat
Apply as first coat. Leave to dry 12 hours or preferably overnight.
Third Coat
Apply as above. Clean applicators with White Spirit.
