Fiddes Boiled Linseed Oil

From: £25.66

Please enter a number
*Condition of surface and application can vary coverage

Boiled Linseed Oil, derived from the controlled oxidation of raw linseed oil, is a time-tested solution for enhancing interior and exterior wood surfaces. Its unique processing method results in a shorter drying time compared to raw linseed oil.

Whether you’re working on furniture, flooring, or outdoor structures, Boiled Linseed Oil provides a durable and protective finish for a wide range of wood substrates. It nourishes the wood, enhancing its natural beauty while offering excellent resistance to the elements.

With Boiled Linseed Oil, you can achieve a smooth and lustrous appearance on your wood projects. Its versatility makes it a popular choice among craftsmen and DIY enthusiasts alike. Experience the benefits of Boiled Linseed Oil for your next interior or exterior wood finishing project.


Ensure all areas to be coated are extremely well ventilated during and after application. Always test on a small area prior to initial application. No primer required. Maximum 2 coats recommended. Apply at room temperature. Fiddes Boiled Linseed Oil is formulated for application directly, and does not require thinning.

First Coat

Stir contents thoroughly before and during use, and apply in a warm, well ventilated room. Apply THINLY using a good quality bristle or synthetic brush and lay EVENLY, following the direction of the grain. Remove any surplus material immediately with a cloth, carefully checking all areas for any excess application. Leave to dry 8-10 hours in warm, dry well ventilated conditions, or preferably overnight.

Second Coat

Apply as first coat, THINLY, allowing good ventilation. Leave to dry 8-10 hours in warm, dry well ventilated conditions, or preferably overnight. Clean applicator with White Spirit. Apply 3 coats to new interior timber, and 4 coats to exterior timber. Clean applicators with White Spirit.


To renovate previous application of Boiled Oil, lightly sand area with 150 grit sandpaper, and re-apply.


For regular light maintenance, clean with a damp cloth and wipe dry. Re-application may be necessary where soiling or staining is apparent, following the application details above.


A single application will cover approximately 20-24 square meters per litre, depending on the density of the substrate.

Suggested Products

Coming Soon

You may also like…

    Your Cart
    Your cart is emptyReturn to Shop