1. Apply lacquer using a Bona Roller. Roll with a smooth flowing motion alternately across and with the grain of the wood avoiding accumulations of product. Always maintain a “wet edge” to avoid overlaps.
2. Allow to dry properly before applying further layers of lacquer. Anticipate slightly longer drying time for each layer that is applied.
3. Make an intermediate sanding before the final coat using Bona Diamond Abrasives Grit 120 or similar. Remove any dust before applying the final layer of lacquer.
Note: If exceeding 24 hours between coats, the surface should always receive a light intermediate sanding.
The floor will take light foot traffic approximately 8 hours after the final application. Allow the surface to dry for at least 5 days before covering with carpets or other floor coverings or loading with heavy objects. Also avoid damp mopping the floor during this time.
Category: Waterborne 1-comp
Drying time: 1-2 h between coats
Application tools: Bona Roller (11 mm)
Coverage: 8-10 sqm/L and application