Bona DCS 50

£1,084.91

Powerful & compact vacuum unit for dust-free sanding.

The Bona DCS 50 is a powerful and compact vacuum unit designed for dust-free sanding.

It offers several key benefits:

Suitable for both dry and wet cleaning: The vacuum unit is designed to handle both dry and wet cleaning, providing versatility in various cleaning tasks.
Dust class M: It meets the dust class M standard, which ensures high-performance dust filtration and containment.
Certified filtration efficiency: The unit has a certified filtration efficiency of 99.9%, meaning it effectively captures and contains fine and hazardous wood dust.
Cooling air filtration and electronic filter detection: The vacuum unit is equipped with cooling air filtration, ensuring the efficient and reliable operation of the machine. It also features electronic filter detection, which alerts users when the filter needs to be cleaned or replaced.
Drain hose for convenient liquid disposal: The unit includes a drain hose that allows for easy and convenient disposal of liquids collected during wet cleaning.

The Bona DCS 50 is specifically designed to be part of the Bona Dust-Free sanding solution, effectively collecting wood dust generated by Bona sanding machines. Its compact and ergonomic design makes it easy to handle and transport, enabling efficient and hassle-free operation on any job site.

Technical data:

Weight: 19 kg
Dimensions: 640 x 370 x 1045 mm
Dust holding capacity (bag): Approx. 51 L
Liquid holding capacity (tank): Approx. 35 L
Motor power: 230 V, 50/60Hz, 1380 W, 6 A

Air flow: 140 m3 per hour
Pre-filter: Teflon coated membrane filter

Hose aperture: 35 mm in diameter
Hose length: 5 m

PREPARATION:

• Make sure that the collection container is empty and that the pre-filter is correctly fitted. Check that the filters of the machine are intact and unharmed.
• Check the cable for damage. Connect the cable to a 230 V power socket which should have at least a slow fuse of 6 A. And for your own safety always use an earth leakage circuit breaker.

Connect the vacuum hose to the DCS 50 and the other end to the preferred sanding machine or to the suction tube. Connect the sanding machine’s power cord to the DCS 50 if auto-start is
preferred.
Bona DCS 50 can be used with machines with a power rating of up to 2200 W.

DIRECTIONS FOR USE:

When the machine has been correctly assembled and connected it can be switched on and off by using the start button. Observe that the machine is equipped with an alarm system which registers low air flow. When using handheld power tools, we recommend using the Air Flow Control. Open the Control to secure that the Airflow is sufficient.
Bona DCS 50 is equipped with a power outlet with automatic start/stop. The vacuum cleaner will start once the connected sanding machine or other electrical tool is switched ON and similarly stop (with delay) when switched OFF. The automatic start/stop is activated by turning the start button to position N° 2 Automatic. The machine will not start until the connected machine is started.

Note: Maximum power consumption of the connected machine must not exceed 2200 W. If a more powerful
machine is to be used, make sure to connect that machine to a separate / independent wall socket.

Dry vacuum cleaning

The device can be used with a plastic dust bag which uses the full volume of the container. Suitable for large grits and coarse materials. For fine dust it is recommended to mount a fleece filter bag.
Installing the fleece filter bag
1. Unlock and remove the top of the machine.
2. Fit the fleece filter bag.
3. Fit and lock the top of the machine.

Changing the fleece filter bag
1. Unlock and remove the top of the machine
2. Pull the fleece filter bag on the flange up and out.
3. Seal the fleece filter bag with cap.
4. Dispose of the used fleece filter bag in accordance with statutory regulations.
5. Fit the new fleece filter bag.
6. Fit and lock the top of the machine.

Wet vacuum cleaning

Installing squeegees on the nozzle
1. Remove the brush strip.
2. Install the squeegees.

Removing the fleece filter bag
1. The fleece filter bag must always be removed when vacuuming wet substances. Unlock and remove the suction head.
2. Pull the fleece filter bag on the flange up and out.
3. Seal the fleece filter bag with cap.
4. Dispose of the used fleece filter bag in accordance with statutory regulations.
5. Fit and lock the suction head.

Drain the wastewater
1. Drain the wastewater using the drain hose at the back of the machine.